When Buying a new set of skateboard trucks you first need to know the deck width you will be using them with. For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75" deck matches a 5.0" truck, an 8.0" deck matches a 5.25" truck.
What size trucks do you need for a 8.1 deck?
In general, we would recommend choosing a truck with an axle width that's exactly the same width as your deck. A margin of +/- 0.125″ is totally okay. So, for a deck that is 8″ wide trucks an axle width from 7.875″ – 8.125″ are ideal.
Can I skate 7.75 trucks on a 8 deck?
My trucks and deck are 7.75 and I want to buy an 8" deck, would the trucks fit on? Yep. The trucks will fit fine, just not optimally.
Will 5.25 trucks fit a 8.25 deck?
You're fine 5.25 is the width of the hanger not the axle. A 5.25 truck has the width of of 8.0in across the axle. 8.0 trucks on a 8.25 is fine. If your decks are within 1/4" of the truck size then you should be fine.
What happens if your trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you're trucks don't match your board and aren't wide enough you'll get the carpet riding effect. You won't be able to see your wheels, just your deck. Just a tad too small doesn't really matter but at a certain point, you'll run into trouble.
17 related questions foundWhat size deck do 5.25 trucks fit?
The right size trucks for an 8″ deck is typically a 5.25″ truck. This can vary slightly depending on the brand of trucks but this is the most common and well know size trucks for an 8″ deck.
Do all skateboard trucks fit all decks?
The trucks should always fit the width of your Skateboard. It's important that they're not much wider than the deck because otherwise, the centre of gravity will shift to the side of the deck. This may have an effect on flip tricks and can affect the general boardfeel.
How good are Krux trucks?
To me, the Krux trucks were a perfect fit. They never felt like I was asking too much (unlike Mini-Logo trucks I've skated in the past). The Krux skated well enough essentially right from the get-go but got even better with every passing session and an extra degree in the sunshine.
What does 99a mean on wheels?
More videos on YouTube
Most range between 75a to 104a. Any wheel in the 78a to 90a range is considered a soft wheel, 90a to 98a is in the middle, 99a+ is referred to as a hard wheel. We recommend choosing hard wheels for skate parks and street skating on ledges, rails, gaps and manual pads.
What do skateboard truck sizes mean?
Truck size is measured by axle width or hanger width. The width of the hanger and axle determines how far apart your wheels are. The width of your trucks will affect the performance of your board, since different truck widths are better suited for certain riding styles.
Are hollow trucks better?
Lighter trucks won't help you ollie higher, but aluminum is usually stronger than the mix of metal trucks are made out of. Hollows aren't that much more expensive as regular trucks but there isn't a difference in performance.
What size deck should I get?
We recommend starting with a skateboard deck width that is proportional to your shoe size. If you wear men's size 6.5 to 9, start out with a deck width of 7.5 to 8.0 inches. If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches.
Does it matter what bearings you get?
You can't go wrong. Nearly all skateboard bearings have been standardized so that all wheel and bearing brands are compatible. The standard skateboard bearing size is an 8mm inner race diameter.
Do all bushings fit all trucks?
All trucks come with stock bushings, but some prefer to replace them. Not everybody weighs the same and skaters prefer different tightness on the trucks. Note that bushings need to break in a little before you can tell you want to replace them.
Is it better to skate loose or tight?
If you're used to skating tight trucks, loosening them can improve the flow of your skateboarding. Without having to tic-tac up to an obstacle or lean drastically as you roll away, your skating will take on an easier, more care-free look. If your style seems rigid, try loosening your trucks.
How tight should trucks be for beginners?
Your trucks should be loose enough that you don't need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider's preference. That being said, they should be tight enough that the kingpin won't fall out and loose enough that the bushings don't burst.
Is it better to have wider trucks?
Wider trucks provide more stability because you cover a larger surface. They are less responsive than narrow trucks resulting in a larger turning radius compared to narrow trucks. Narrow trucks weigh less, are smaller, and have a lower moment of inertia. Because of this, it makes it kickflips a little bit easier.
Do 8.25 trucks fit an 8.0 deck?
Take a look at the table below for the recommended optimal deck widths for each truck size. For example: 7.75″ Deck = 5.0″ Trucks 8.0″ Deck = 5.25″ Trucks 8.25″ Deck = 5.5″ Trucks.
