How do I change the display on my Bosch Purion?

Press and hold the "-" button to toggle between the different types of information that can be shown on the Purion screen's middle row: Range Estimate (based on battery charge remaining, e-assist mode, and data from your last mile of riding)

How do I set my Bosch Purion display?

If you have a GSD Gen 2, your bike lights are set to "always on", which means you only need to turn on your Purion display in order to use your front and rear lights. On other bikes, slide the switch on the rear of the Valo light to the right. Then, press and hold the Purion's "+" button for 3 seconds.

Can you upgrade the Bosch Purion display?

For any bicycles with the Purion display, the system can be upgraded to Intuvia, Kiox or Nyon. If the bicycle is a Class 1 (20mph), it can also be upgraded to SmartPhone Hub. For any bicycles with an Intuvia display, the system can be upgraded to Kiox or Nyon.

Can you upgrade Bosch ebike display?

Can You Upgrade Bosch Ebike Display? With Bosch eBike Systems, you can get the best drive units, batteries, and displays right out of the box. Both new and older pedelecs can be upgraded with a variety of accessories and retrofit options.

How do I change Bosch from Purion to Miles?

To change your Purion display's units from km to mi (or vice versa), hold down the "-" button and tap the Power button once.

Are eBike displays interchangeable?

The displays are generally developed paired with a specific motor controller and for a specific set of kit functions, and it's very rare that you can switch to a different make of motor controller and have it work with your display, or conversely that you could find an alternate display for your particular controller.

How do I update my Bosch active line?

Using the + and – buttons on the Compact Remote, select the menu item "My eBike". 4. Then select "Components".
...

1. Launch the eBike Flow app on your smartphone.
2. If you haven't already done so, connect your eBike to the Flow app.
3. Search for an available software update under Settings (cogwheel icon) > Your eBike.

Can Ebikes be upgraded?

Most of the time the easiest thing to change is the rear gearing. If you've got a cassette, it's simple for any bike shop to swap to something with different gearing. Some electric bikes will have a rear freewheel instead of a hub and cassette. This is just as simple to change but there are fewer options out there.

How do I put my Bosch eBike in walk mode?

To activate walk assistance, press start-up help/walk assistance (WALK) at the top of the control unit.

How do I reset my Bosch eBike?

To reset trip distance, hold the - key and hold the + key for a couple of seconds. To activate lights (if they are wired in), hold the + button for a few seconds. To change menus, hold the - button (trip distance, odometer, range, assist level).

How do you reset a Bosch eBike?

You can manually reset your trip data by pressing the select button in the screens marked with a dot and confirming the "Reset Trip" message by selecting "Yes". Alternatively you can reset your counter via "Settings" > "My eBike" > "Reset".

What is the difference between Bosch active line and active line plus?

Like the Active Line, the system features a new gear concept: the advantages for the Active Line Plus user are a quiet motor and less resistance when pedaling. The Plus version is more powerful with a maximum torque of 50 Nm and weighs approximately 3.2 kilos.

How do you reset Bosch Performance Line CX?

To reset the battery management system, do the following:

1. Remove the battery from the battery mount.
2. Press and hold the On/Off button on the battery for 10 seconds.
3. The battery management system should now be reset. Re-install the battery and turn on the bike.

Are all bafang displays compatible?

Bafang displays have their own firmware. All displays are not created equal. BTW Bafang does not manufacture displays.

Are hub motors interchangeable?

Yeah, you can swap out motors but you will need to match the controller and display and if the motor is bigger, you will need a new set of spokes, at least, a new wheel at most.

How long does an eBike controller last?

On average, an electric bike controller will last a minimum of 3-4 years, just like the battery and the motor. You can determine the need to replace the controller by testing it with a multimeter to measure the voltage crossing the terminals.

How do I check mileage on Purion?

Purion Display

1. Power on your bike.
2. Long press and release the button on the display to cycle through the trip computer functions looking for "Total"
3. The number underneath "Total" is your odometer reading (total mileage)

How do I turn off the ebike light?

To switch off the bike lights, long press the + button. The lighting symbol (circled in blue) will display when the light is on.

How do you turn on the light on a Bosch electric bike?

The Purion display is located by the left handle bar grip and it is used to activate the Herrmans front and rear lights which come included on Bosch powered Xtracycles. To switch on the front and rear lights, medium press the + button on the top left of the display (circled in orange).

How do I reset my Bosch Purion?

Reset trip distance: hold the – key and hold the + key for a couple of seconds. Turn On Lights (if they are wired in): hold the + button for a few seconds. Change Menus as you would in a car, hold the – button (trip distance, odometer, range, assist level).

How do I reset my eBike?

How Do I Reset My eBike Battery? To reset your e-bike battery, make sure to unmount it from your e-bike to work safely and comfortably. Pressing and holding the power button for 10 seconds will reset the battery. In that case, you can mount it back on your e-bike and turn on the battery for you to use it.