Can you use solarez on PU?

Yes, you can. If you are repairing the tops surface be sure to roughen it up with 60 grit sandpaper we supply 60 grit in our tube pkg. if you are doing ONLY surface repairs, you can still use regular solarez for polyester boards. But if the gouges invade to the core, you cannot use the poly formula.

Can you use epoxy on a PU board?

But the most important thing you have to realize: if you have an epoxy surfboard, fix it with epoxy resin. If you have a PU surfboard you can actually fix it with epoxy resin or polyester resin, but it's better to fix it with polyester resin.

Can you use solarez on a foam board?

WHAT SOLAREZ® PRODUCT WILL WORK ON STYROFOAM? Wahoo International2020-03-31T16:25:38-08:00Only Solarez EPOXY (blue tube) will work on Styrofoam. Solarez polyester contains styrene monomer and will melt the Styrofoam. Even EXTREME (vinyl ester epoxy) contains styrene and can not be used directly on Styrofoam.

Can you use solarez on EPS?

FILLING A DEEP DING THAT INVADES TO THE EPS CORE:

1) If white EPS foam is exposed in any situation, first coat the EPS with Solarez EPOXY (in the blue tube). Allow 2 to 3 minutes for it to cure in good sunlight or with artificial UV light.

Is solarez a permanent fix?

MFitz73 Well-Known Member. suncure and solarez sun curing products can be used for permanent repair.

Can I sand solarez?

After the Solarez cures, you can sand it if you want. I usually don't bother sanding mine unless the cured resin is poky or sharp. But I know a lot of you want everything to be perfect, so go ahead and sand it so it's perfectly flush with the rest of your surfboard.

Can you use solarez on epoxy?

Re: can i use polyester solarez on my epoxy surfboard

Nope you need to use the epoxy one. Polyester and epoxy do not bond but more importantly the chemicals used in polyester can have some rather "interesting" effects on eps, if this is what the board is shaped from and the resin reaches the foam.

Can I use epoxy resin on polyester surfboard?

There are two types of surfboard construction - Traditional polyester resin, and epoxy. This is important to remember as polyester resin and the polystyrene core of an epoxy board DO NOT MIX. If you use polyester resin on an epoxy surfboard it will eat away the polystyrene core.

Is Solarez toxic?

HARMFUL IF INHALED. MAY CAUSE ALLERGIC RESPIRATORY REACTION. MAY CAUSE LUNG DAMAGE. MAY CAUSE ALLERGIC SKIN REACTION.

How long does Solarez need to cure?

SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight. No mixing necessary.

How long does Solarez take to cure?

Solarez UV Resins | Hardens in 3 minutes when exposed to uv sunlight.

Will a UV flashlight cure resin?

The resin will cure within 1 to 2 minutes when placed under a UV torch, within 15 minutes in direct sunlight, and within one hour on a cloudy day.

Can you use epoxy solarez on PU board?

Yes, you can. If you are repairing the tops surface be sure to roughen it up with 60 grit sandpaper we supply 60 grit in our tube pkg. if you are doing ONLY surface repairs, you can still use regular solarez for polyester boards. But if the gouges invade to the core, you cannot use the poly formula.

Do pro surfers use epoxy boards?

Do professional surfers use epoxy surfboards? Yes. Pro surfers compete with expanded (EPS) or even extruded polystyrene (XTR/XPS) surfboards in certain wave conditions. EPS is an open-cell foam.

Does epoxy resin damage polystyrene?

Extruded Polystyrene (XPS) and Expanded Polystyrene (EPS) blanks are quite popular. However, these materials will break down and dissolve if polyester resin is applied. That means only epoxy resin can be used.

Can Solarez dry without sun?

SOLAREZ® quickly hardens but only when exposed to direct sunlight. In the shade, you have all the time you need to put the resin where you want it and to remove excess bubbles.

How do I clean my Solarez?

I had been using isopropyl alcohol, soapy water, lacquer thinner etc. For cleaning up, thinning and removing any tackyness on cured resin, this is the only product you should use.

Is epoxy stronger than PU?

There are many differences between the handling characteristics of an epoxy surfboard vs a PU surfboard. A PU surfboard has more flex but is easier to ding. An epoxy board has resin that is up to 35% stronger than resin used on a fiberglass board.

Is my board PU or epoxy?

How do you tell epoxy from regular boards?, Well to start with look at the manufacturers logos (the “stickers” under the glass work), most reputable board builders will put the word epoxy on most or at least one of these, so READ them all first, if you find the word epoxy on any of these than it is an epoxy… as for the ...

Which is stronger polyester resin or epoxy resin?

Epoxy is known for its higher bonding capabilities overall. An epoxy's relative strength can hold up to 2,000 lbs. per square inch, while a polyester resin can hold less than 500 lbs. per square inch.

Can you fix an epoxy surfboard?

Most surfboard shapers can repair epoxy these days, if you can find a "nice shaper" and asked them nicely I'm sure they'd show you the ropes and what there doing.

Can UV resin be thinned?

In a short answer, yes, you can do this. Solvents like acetone and alcohol will thin resin once it's mixed. Be sure to add no more than 1 part solvent to 10 parts mixed resin as it may inhibit curing.